Autel MaxiIM KM100 Key Tool

Autel MaxiIM KM100 Key Tool Transponder Key Generator Technical Support

Search This Blog

Showing posts from May, 2023

View all

Posts

Autel KM100 Adds Mazda CX-5 2019 Key with Autel Key

on May 23, 2023

Autel KM100 autel smart keys

+

0

Get link
Facebook
X
Pinterest
Email
Other Apps

Search This Blog

Autel KM100 Cannot Charge Battery Solution

Dead Autel km100 solution. If the battery is fully discharged and cannot be charged and turned on anymore, open km100, disconnect battery and attach power 4.2-4.4v directly to battery terminals + and -. Keep it for 10-15 min. Then assemble all together, connect Charger to usb-c and it will work again. I use Dc power adapter with output 4.2v 500ma. This must override the battery sense circuit. Since, the battery is fully discharged, the sensor cannot detect battery presense.

How to Flash Autel MaxiIM KM100?

One of our customers’ Autel MaxiIM KM100 device automatically restarts every 5-10 minutes, in this case he will need a firmware reflash. Free Download Autel KM100 flash files https://we.tl/t-gzlwQ6YhHI Installation instructions are mentioned, along with the boot files. Preparation: One TF card (larger than 4G, please backup all personal files) One card reader. Windows computer (make sure the windows computer USB port has write permission.) “update.img” file (included in the flash files). “SDDiskTool” (included in the flash files) An Autel KM100 which needs to be flashed. Step 1: Install flash file Copy “update.img” to Windows computer. Insert the TF card to card reader and plug the card read to computer USB port. Decompress the “SDDiskTool_v1.61.zip”to computer, will see the “SDDiskTool_v1.61”folder. Run “SD_Firmware_Tool.exe” program in “SDDiskTool_v1.61” like the following screenshot: Select removable disk. The inserted TF card will be selected automa...

Autel KM100 Clone Toyota 4D Tranponsder using AT100 Super Chip

In this article, we’ll walk through a real-world example of cloning a Toyota 4D transponder key using Autel MaxiIM KM100 and AT100 super chip . Step 1: Reading the Original Key The first step in the cloning process is to read the data from the original Toyota 4D key. Using the Autel KM100, the user connects to the key via Wi-Fi and reads the necessary information. This step is crucial as it ensures that the data from the original key is accurately captured and ready to be transferred to the new chip. Step 2: Cloning the Key Once the original key’s data has been read, the next step is to clone it onto the AT100 chip . The user removes the original transponder from the key and replaces it with the new AT100 chip. The Autel KM100 is then used to transfer the data from the original key to the new chip. The process is straightforward, and the tool provides clear feedback once the cloning is complete. Step 3: Testing the Cloned Key After the cloning process i...

Labels

APB112 emulator
Autel AT100
Autel Gbox
Autel IM508
Autel IM608
Autel KM100
Autel KM100 update
Autel MaxiIM KMM100
autel smart keys
Autel VCI200

Gbox
Godiag GT100
KM100 key tool
Lonsdor LT20
OTOFIX IM1
Toyota 8A AKL adapter
vvdi super chip

Show more Show less

Powered by Blogger