Autel KM100 Register and Update Guide

on

 Autel tutorial: how to register and update Autel MaxiIM KM100 software and VCI.

 

Part I: Register KM100
Turn on KM100
Accept disclaimer
Go to Settings>>System Settings>>WLAN

Connect Autel KM100 to Wi-Fi.

Autel KM100 Register and Update 1

Autel KM100 Register and Update 2

Autel KM100 Register and Update 3

Autel KM100 Register and Update 4


Back to Homepage, select “Update”.
KM100 says the product has not been registered.
Press Register

Autel KM100 Register and Update 5

Autel KM100 Register and Update 6

If you don’t have an Autel account, register Autel account with email, and password
If have Autel account, login and register KM100 with serial number

Autel KM100 Register and Update 7

Autel KM100 Register and Update 8

Autel KM100 Register and Update 9

Autel KM100 Register and Update 10

Part II: Update KM100
After registration, go to Home page-> Update

Download System Program

Autel KM100 Register and Update 11

After it’s done, device will reboot automatically.

Back to “Update” again, download “KeytoolDiag”.
Then download all immo programs required.

 

Part III: Update PLC200 VCI Firmware
Back to “Settings”, and select “VCI manager”.

Connect VCI to device by USB cable.

Autel KM100 Register and Update 12

Autel KM100 Register and Update 13

Switch to “Firmware upgrade” and update firmware if there is one available.

Autel KM100 Register and Update 14

Autel KM100 Register and Update 15

Autel KM100 Register and Update 16

Autel KM100 Register and Update 17

Done.


https://www.obdii365.com/service/register-update-autel-km100-software-and-vci.html

Comments

Post a Comment