How to Clone PSA BSI with Autel KM100?

on

 How-to: read/write (clone) BSI PSA Valeo or Johnson Controls on table with Autel MaxiIM KM100/Autel IM508/IM608 (menu is the same) and the Godiag GT100 breakout box.

 

Need to find the wiring diagram by yourself.

For the pinout, you can see at the beginning of this video where it very well details the connection on the table.

Cloning BSI is high risk.  Proceed with caution. You are at your own risk.


Here is the connection with godiag breakout box.

Clone PSA BSI with Autel KM100 1

Clone PSA BSI with Autel KM100 2

Clone PSA BSI with Autel KM100 3

Clone PSA BSI with Autel KM100 4

Clone PSA BSI with Autel KM100 5

In Autel KM100, select IMMO->Citroen->Manual Selection->C3->2009-2016 blade key->Control Unit->Read Immobilizer password (BSI)

Clone PSA BSI with Autel KM100 6

Clone PSA BSI with Autel KM100 7

Clone PSA BSI with Autel KM100 8

Clone PSA BSI with Autel KM100 9

Clone PSA BSI with Autel KM100 10


Press the emergency flasher indicator
Read PIN

Clone PSA BSI with Autel KM100 11
Logging into system
Read EEPROM
Verify password

Clone PSA BSI with Autel KM100 12

Clone PSA BSI with Autel KM100 13


Go back to the Control Unit menu, select BSI clone
Make sure the BSI type, BSI number and BSI number2 is consistent before performing the function.

Clone PSA BSI with Autel KM100 14

Need to give power supply during BSI cloning.
Press emergency flasher indicator
Check and confirm BSI information

Clone PSA BSI with Autel KM100 15

Clone PSA BSI with Autel KM100 16

Press Yes to clone BSI
Logging into system
Read and save EEPROM

Clone PSA BSI with Autel KM100 17

Clone PSA BSI with Autel KM100 18

Clone PSA BSI with Autel KM100 19

Read and save Flash data

Clone PSA BSI with Autel KM100 20

Clone PSA BSI with Autel KM100 21

Then you have to rewrite the previously saved flash and eeprom on the replacement BSI and that’s it.

Comments

Post a Comment